Hydrotechnik home

DATA SHEETS
Sensors
Qt 500 Data Sheet

Pressure Sensor HySense® QT 500

The HySense QT 5xx is a high precision turbine flow meter which measures volumetric flow rate in stationary and mobile hydraulic equipment’s. Two MINIMESS®-test points are specially preassembled to allow both pressure and temperature sensors to be installed without shutting the equipment down. In comparison to traditional turbine flow meter’s, the QT5xx can withstand higher dynamic loads due to its structural design. The ISDS functionality realizes an automatic sensor identification and parameterization in Hydrotechnik  instruments. A further huge advantage is the optional viscosity compensation which compensates the reduction of the measurement performance relative to the viscosity change. Two main design versions are available.
   -  BSPP threads conform to DIN ISO 228 and a calibration range in L/min.
   -   • UNF / UN threads conform to ANSI B1.1 and a calibration range in GPM. Available output signals: • Frequency • Analog (4…20mA) • CAN The ISDS functionality is implemented in each output signal.

  •    -  BSPP threads conform to DIN ISO 228 and a calibration range in L/min.
  •    -  UNF / UN threads conform to ANSI B1.1 and a calibration range in GPM.
  •    -  Frequency, Analog (4…20mA), CAN
  •    -  The ISDS functionality is implemented in each output signal.
QT 500