Hydrotechnik home

DATA SHEETS
Sensors
QT106 Data Sheet

Pressure Sensor HySense® QT 106

The turbine volume flow meter HySense® QT functions according to the flow principle. A medium flow through a tube in an axial direction and makes the turbine wheel turning. The single turns are caught by a signal pick-up which changes the signals in digital impulses. HySense® QT turbine volume flow meters are available in different measurement ranges from 1 until 1000 l/min. Model QT 106 has been adapted for the CAN bus based on our precise and proven measuring turbine with inside thread connection according to DIN ISO 228.is for CAN connection.

Your benefit at a glance:

QT 106 more information here
  •    -  Easy to handle: Good reliability, low error limits
  •    -  Easy to install
  •    -  Low energy loss, long life
  •    -  Real-time information
  •    -  Short response time
  •    -  Linearisation in the measuring instrument
  •    -  Low flow resistance, suitable for lots of media
  •    -  Low weight, small dimensions and arbitrary mounting position
  •    -  High media temperature and working pressure up to 5801 psi
  •    -  Small delta-P (differential pressure)
  •    -  Media viscosity up to 270 mm2/s (cSt)
Technical:
  •    -  Circular connectors M12 x 1 with screw-locking A-coding, 5 poles, male IEC / DIN EN 61076-2-101
Design size Connection thread Length Hex Max. pressure  Weight
    mm mm Bar PSI g
QT 1xx 10L ISO 228-G¼ 120 41 420 6000 ca. 685
QT 1xx 75L ISO 228-G¾ 130 46 420 6000 ca. 876
QT 1xx 300L ISO 228-G1 150 55 420 6000 ca. 1214
QT 1xx 600L ISO 228-G1¼ 174 60 350 5000 ca. 1500

Part Number Accessories and Spare Parts 
8824-S1-02.50S Measuring cable frequency / 4…20mA / ISDS (standard) For turbine 31V7-… and 31G7-... with and without ISDS, IP40, max. traction 160N, 2.5 m M16 6-pole connector – 6-pole M16 socket
8824-S1-02.50H Measuring cable frequency / 4…20mA / ISDS (standard) For turbine 31V7-… and 31G7-... with and without ISDS, IP67, max. traction 300N, 2.5 m, M16 6-pole connector – 6-pole M16 socket
8824-M5-02.50 Measuring cable CAN for MS 5060 For CAN turbine 31C7-…, M12 5-pole socket – M12 8-pole connector
8824-R7-02.50 Measuring cable CAN for MS 4010 and 5060plus For CAN turbine 31C7-…, M12 5-pole socket – M12 8-pole connector
8824-S4-00.20 Measuring cable double signal connection for frequency output For turbine with direction detection 31D7-... with and without ISDS
8824-I4-00.00 Measuring cable 4…20mA M12x1 5-pol. For turbine with IP67 and current output 31E7-…
3763-03-34.00 p/T Sensor pressure / temperature sensor HySense TP 180, 4…20mA, IP40, 0…60 MPa
3403-18-C3.37 Pressure sensor HySense PR 110, 4…20mA, IP67, 0…60 MPa
34P3-18-01.37A2 Pressure sensor HySense PR 410, 4…20mA, IP67, 0…60 MPa
3969-04-01.00S Temperature sensor HySense TE 110, 4…20mA, IP67, -50…+200°C
2103-07-18.62N Direct connection straight MINIMESS® series 1620, ISO228-G ¼“ female
2103-30-18.10N Coupling with plastic cap MINIMESS® series 1620, ISO228-G ¼“ female
31W7-00-09.00 Inductive sensor HySense RS 210, frequency output, IP67, M14x1
31W7-00-S-09.00 Inductive sensor with ISDS HySense RS 200 ISDS, frequency output, IP67, M14x1
31W7-00-26.00 Inductive sensor with current output HySense RS 210, current output 4…20mA, IP54, M14x1
31W7-00-S-26.00 Inductive sensor with current output and ISDS HySense RS 200 ISDS, current output 4…20mA, IP54, M14x1